Current site: Peikko Group Global (English). Do you want to change country or language?

Peikko Group Global (English)

METAFORM® Free Movement Joint — System for Medium to Heavy-Duty Concrete Floors

METAFORM® Free Movement Joint has been discontinued, and is no longer available for new orders.

We recommend hot dip galvanized (HDG) models of OPTIMAJOINT® Free Movement Joint as a replacing product, offering an easier and more cost-effective solution to your requirements.

OPTIMAJOINT® Free Movement Joint product page.

Model options

Single Rail TDC 5

METAFORM® (Single Rail) can be used singly for a number of basic applications, such as a perimeter form to define the area of floor to be cast, where sleeves can be left in the slab to make provision for a later extension. When using a single METAFORM® rail, it provides arris armoring only to one slab. Suitable to form a basic restrained movement or tied joint. TDC 5 dowel system is recommended for construction of ground bearing contraction free movement joints with joint openings of up to 10 mm.

Dimensions

Detailed technical information

Comprehensive product information like resistances, required supplementary reinforcement, concrete grades, limitations of use etc. can be found within the Technical Manual. Product details may be country-specific. For design, always use product information that is localized for design's destination country. Country specific Technical Manuals can be found under Design Tools -page, or from website of the country in question.

Model options

Single Rail TDC 6

METAFORM® (Single Rail) can be used singly for a number of basic applications, such as a perimeter form to define the area of floor to be cast, where sleeves can be left in the slab to make provision for a later extension. When using a single METAFORM® rail, it provides arris armoring only to one slab. Suitable to form a basic restrained movement or tied joint. TDC 6 dowel system is recommended for joint openings up to 15 mm.

Dimensions

Detailed technical information

Comprehensive product information like resistances, required supplementary reinforcement, concrete grades, limitations of use etc. can be found within the Technical Manual. Product details may be country-specific. For design, always use product information that is localized for design's destination country. Country specific Technical Manuals can be found under Design Tools -page, or from website of the country in question.

Model options

Single Rail TDR 6

METAFORM® (Single Rail) can be used singly for a number of basic applications, such as a perimeter form to define the area of floor to be cast, where sleeves can be left in the slab to make provision for a later extension. When using a single METAFORM® rail, it provides arris armoring only to one slab. Suitable to form a basic restrained movement or tied joint. TDR 6 dowel system is designed for construction of ground bearing expansion free movement joints with 15 mm initial joint opening, which is sufficient for all climatic regions.

Dimensions

Detailed technical information

Comprehensive product information like resistances, required supplementary reinforcement, concrete grades, limitations of use etc. can be found within the Technical Manual. Product details may be country-specific. For design, always use product information that is localized for design's destination country. Country specific Technical Manuals can be found under Design Tools -page, or from website of the country in question.

Model options

DUO TDC 6

METAFORM® DUO is designed to construct formed contraction free movement joints in conventional ground bearing or pile supported concrete floors. Ideal for use at large bay construction methods, suitable for joined and jointless floors. Two METAFORM® rails are used back to back to provide full arris armoring of both slabs. TDC 6 dowel system is recommended for joint openings up to 15 mm.

Dimensions

Detailed technical information

Comprehensive product information like resistances, required supplementary reinforcement, concrete grades, limitations of use etc. can be found within the Technical Manual. Product details may be country-specific. For design, always use product information that is localized for design's destination country. Country specific Technical Manuals can be found under Design Tools -page, or from website of the country in question.

Model options

DUO TDR 6

METAFORM® DUO is designed to construct formed contraction free movement joints in conventional ground bearing or pile supported concrete floors. Ideal for use at large bay construction methods, suitable for joined and jointless floors. Two METAFORM® rails are used back to back to provide full arris armoring of both slabs. TDR 6 dowel system is designed for construction of ground bearing expansion free movement joints with 15 mm initial joint opening, which is sufficient for all climatic regions.

Dimensions

Detailed technical information

Comprehensive product information like resistances, required supplementary reinforcement, concrete grades, limitations of use etc. can be found within the Technical Manual. Product details may be country-specific. For design, always use product information that is localized for design's destination country. Country specific Technical Manuals can be found under Design Tools -page, or from website of the country in question.

Model options

DUO UDR 8

METAFORM® DUO is designed to construct formed contraction free movement joints in conventional ground bearing or pile supported concrete floors. Ideal for use at large bay construction methods, suitable for joined and jointless floors. Two METAFORM® rails are used back to back to provide full arris armoring of both slabs. UDR 8 dowel system is recommended for joint openings from 15 to 20 mm wide and for pile supported slabs. 

Dimensions

Detailed technical information

Comprehensive product information like resistances, required supplementary reinforcement, concrete grades, limitations of use etc. can be found within the Technical Manual. Product details may be country-specific. For design, always use product information that is localized for design's destination country. Country specific Technical Manuals can be found under Design Tools -page, or from website of the country in question.

Model options

DUO SS TDC 6

METAFORM® DUO SS is designed to construct formed contraction free movement joints in conventional ground bearing or pile supported concrete floors with the addition of two 15mm x 3mm stainless steel strips fixed to the uppermost edges. Therefore it is suitable for use on floors where the requirement is for a resin coated or screed finish, and corrosion is non-permissible. It is ideal solution for hygienic, pharmaceutical, or food processing environments. TDC 6 dowel system is recommended for joint openings up to 15 mm.

Dimensions

Detailed technical information

Comprehensive product information like resistances, required supplementary reinforcement, concrete grades, limitations of use etc. can be found within the Technical Manual. Product details may be country-specific. For design, always use product information that is localized for design's destination country. Country specific Technical Manuals can be found under Design Tools -page, or from website of the country in question.

Model options

DUO SS TDR 6

METAFORM® DUO SS is designed to construct formed contraction free movement joints in conventional ground bearing or pile supported concrete floors with the addition of two 15mm x 3mm stainless steel strips fixed to the uppermost edges. Therefore it is suitable for use on floors where the requirement is for a resin coated or screed finish, and corrosion is non-permissible. It is ideal solution for hygienic, pharmaceutical, or food processing environments. TDR 6 dowel system is designed for construction of ground bearing expansion free movement joints with 15 mm initial joint opening, which is sufficient for all climatic regions.

Dimensions

Detailed technical information

Comprehensive product information like resistances, required supplementary reinforcement, concrete grades, limitations of use etc. can be found within the Technical Manual. Product details may be country-specific. For design, always use product information that is localized for design's destination country. Country specific Technical Manuals can be found under Design Tools -page, or from website of the country in question.

Model options

DUO SS UDR 8

METAFORM® DUO SS is designed to construct formed contraction free movement joints in conventional ground bearing or pile supported concrete floors with the addition of two 15mm x 3mm stainless steel strips fixed to the uppermost edges. Therefore it is suitable for use on floors where the requirement is for a resin coated or screed finish, and corrosion is non-permissible. It is ideal solution for hygienic, pharmaceutical, or food processing environments. UDR 8 dowel system is recommended for joint openings from 15 to 20 mm wide and for pile supported slabs. 

Dimensions

Detailed technical information

Comprehensive product information like resistances, required supplementary reinforcement, concrete grades, limitations of use etc. can be found within the Technical Manual. Product details may be country-specific. For design, always use product information that is localized for design's destination country. Country specific Technical Manuals can be found under Design Tools -page, or from website of the country in question.

Model options

DUO EX

METAFORM® DUO EX is designed to construct effective formed external free movement expansion joints at applications where arris armoring is required. It is fitted with 15 mm thick closed cell compressible foam. The rectangular sleeves in combination with TDR 6 dowels allow 15 mm expansion movement which is sufficient for all climatic regions.

Dimensions

Detailed technical information

Comprehensive product information like resistances, required supplementary reinforcement, concrete grades, limitations of use etc. can be found within the Technical Manual. Product details may be country-specific. For design, always use product information that is localized for design's destination country. Country specific Technical Manuals can be found under Design Tools -page, or from website of the country in question.

Download design tools

Peikko Toolbox for Revit and AutoCAD

Peikko Toolbox includes Revit families and AutoCAD 2D blocks for many Peikko products. Peikko Toolbox supports Autodesk Revit, AutoCAD and AutoCAD LT versions 2016, 2017 and 2018. It includes product information and automatically notifies users of available updates.

Contact us

Petri Suur-Askola

Business Director

Connections

Tel. +358 20 707 511
Mob. +358 40 5455575
petri.suur-askola@peikko.com